生产环境中常用的iptables脚本
iptables是用于监控进/出服务器流量的一个工具，iptables使用一个叫做table的结构，而这些tables包含了一系列规则(set of rules)，我们称这些规则为chain，chain会过滤进/出服务器的数据包(data packets)。
创新互联长期为近1000家客户提供的网站建设服务，团队从业经验10年，关注不同地域、不同群体，并针对不同对象提供差异化的产品和服务；打造开放共赢平台，与合作伙伴共同营造健康的互联网生态环境。为普宁企业提供专业的成都网站建设、网站制作，普宁网站改版等技术服务。拥有十年丰富建站经验和众多成功案例,为您定制开发。
创建 iptables.sh 脚本
[root@Jaking ~]# vim iptables.sh
#!/bin/bash
#清空 filter 表和 nat 表
iptables -F
iptables -t nat -F
#关掉 firewalld
systemctl stop firewalld &>/dev/null
systemctl disable firewalld &>/dev/null
#以下两行允许某些调用 localhost 的应用访问
iptables -A INPUT -i lo -j ACCEPT #规则1
iptables -A INPUT -s 127.0.0.1 -d 127.0.0.1 -j ACCEPT #规则2
#以下一行允许从其他地方 ping
iptables -A INPUT -p icmp --icmp-type echo-request -j ACCEPT #规则3
#以下一行允许从其他主机、网络设备发送 MTU 调整的报文
#在一些情况下，例如通过 IPSec VPN 隧道时，主机的 MTU 需要动态减小
iptables -A INPUT -p icmp --icmp-type fragmentation-needed -j ACCEPT #规则4
#以下两行分别允许所有来源访问 TCP 80,443 端口
iptables -A INPUT -p tcp --dport 80 -j ACCEPT #规则5
iptables -A INPUT -p tcp --dport 443 -j ACCEPT #规则6
#以下一行允许所有来源访问 UDP 80,443 端口
iptables -A INPUT -p udp -m multiport --dports 80,443 -j ACCEPT #规则7
#以下一行允许 192.168.1.63 来源的 IP 访问 TCP 22 端口(OpenSSH)
iptables -A INPUT -p tcp -s 192.168.1.63 --dport 22 -j ACCEPT #规则8
#以下一行允许 192.168.1.3(发起SSH连接的系统对应网卡的IP) 来源的 IP 访问 TCP 22 端口(OpenSSH)
#如果是在远程终端跑本脚本，最好开启以下一行以防被踢掉
#另一种更加简便的方式：iptables -I INPUT -p tcp --dport 22 -j ACCEPT
iptables -A INPUT -p tcp -s 192.168.1.3 --dport 22 -j ACCEPT #规则9
#以下一行允许 192.168.1.26 来源的 IP 访问 UDP 161 端口(SNMP)
iptables -A INPUT -p udp -s 192.168.1.26 --dport 161 -j ACCEPT #规则10
#配置 NAT
#启用内核路由转发功能
echo 1 > /proc/sys/net/ipv4/ip_forward
echo "net.ipv4.ip_forward = 1" > /etc/sysctl.conf
sysctl -p &>/dev/null
#配置源地址转换 SNAT
#将 192.168.2.0/24 转换成 192.168.1.63
iptables -t nat -A POSTROUTING -s 192.168.2.0/24 -j SNAT --to 192.168.1.63 #规则11
#配置目的地址转换 DNAT
#将 192.168.1.63 的 80 端口请求转发到 192.168.2.2 的 80 端口
iptables -t nat -A PREROUTING -d 192.168.1.63 -p tcp --dport 80 -j DNAT --to 192.168.2.2:80 #规则12
#以下一行禁止所有其他的进入流量
iptables -A INPUT -j DROP #规则13
#以下一行允许本机响应规则编号为 1-12 的数据包发出
iptables -A OUTPUT -m state --state ESTABLISHED -j ACCEPT #规则14
#以下一行禁止本机主动发出外部连接
iptables -A OUTPUT -j DROP #规则15
#以下一行禁止本机转发数据包
iptables -A FORWARD -j DROP #规则16
#固化 iptables
iptables-save > /etc/sysconfig/iptables
[root@Jaking ~]# chmod 755 iptables.sh
测试
[root@Jaking ~]# ./iptables.sh
[root@Jaking ~]#
[root@Jaking ~]#
[root@Jaking ~]# iptables -L
Chain INPUT (policy ACCEPT)
target prot opt source destination
ACCEPT all -- anywhere anywhere
ACCEPT all -- localhost localhost
ACCEPT icmp -- anywhere anywhere icmp echo-request
ACCEPT icmp -- anywhere anywhere icmp fragmentation-needed
ACCEPT tcp -- anywhere anywhere tcp dpt:http
ACCEPT tcp -- anywhere anywhere tcp dpt:https
ACCEPT udp -- anywhere anywhere multiport dports http,https
ACCEPT tcp -- 192.168.1.63 anywhere tcp dpt:ssh
ACCEPT tcp -- 192.168.1.3 anywhere tcp dpt:ssh
ACCEPT udp -- 192.168.1.26 anywhere udp dpt:snmp
DROP all -- anywhere anywhere
Chain FORWARD (policy ACCEPT)
target prot opt source destination
DROP all -- anywhere anywhere
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
ACCEPT all -- anywhere anywhere state ESTABLISHED
DROP all -- anywhere anywhere
[root@Jaking ~]# iptables -L --line-number
Chain INPUT (policy ACCEPT)
num target prot opt source destination
1 ACCEPT all -- anywhere anywhere
2 ACCEPT all -- localhost localhost
3 ACCEPT icmp -- anywhere anywhere icmp echo-request
4 ACCEPT icmp -- anywhere anywhere icmp fragmentation-needed
5 ACCEPT tcp -- anywhere anywhere tcp dpt:http
6 ACCEPT tcp -- anywhere anywhere tcp dpt:https
7 ACCEPT udp -- anywhere anywhere multiport dports http,https
8 ACCEPT tcp -- 192.168.1.63 anywhere tcp dpt:ssh
9 ACCEPT tcp -- 192.168.1.3 anywhere tcp dpt:ssh
10 ACCEPT udp -- 192.168.1.26 anywhere udp dpt:snmp
11 DROP all -- anywhere anywhere
Chain FORWARD (policy ACCEPT)
num target prot opt source destination
1 DROP all -- anywhere anywhere
Chain OUTPUT (policy ACCEPT)
num target prot opt source destination
1 ACCEPT all -- anywhere anywhere state ESTABLISHED
2 DROP all -- anywhere anywhere
[root@Jaking ~]# iptables -t nat -L
Chain PREROUTING (policy ACCEPT)
target prot opt source destination
DNAT tcp -- anywhere 192.168.1.63 tcp dpt:http to:192.168.2.2:80
Chain INPUT (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
Chain POSTROUTING (policy ACCEPT)
target prot opt source destination
SNAT all -- 192.168.2.0/24 anywhere to:192.168.1.63
[root@Jaking ~]# iptables -t nat -L --line-number
Chain PREROUTING (policy ACCEPT)
num target prot opt source destination
1 DNAT tcp -- anywhere 192.168.1.63 tcp dpt:http to:192.168.2.2:80
Chain INPUT (policy ACCEPT)
num target prot opt source destination
Chain OUTPUT (policy ACCEPT)
num target prot opt source destination
Chain POSTROUTING (policy ACCEPT)
num target prot opt source destination
1 SNAT all -- 192.168.2.0/24 anywhere to:192.168.1.63
iptables 的清空和恢复
[root@Jaking ~]# iptables -F
[root@Jaking ~]# iptables -L
Chain INPUT (policy ACCEPT)
target prot opt source destination
Chain FORWARD (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
[root@Jaking ~]# iptables -t nat -F
[root@Jaking ~]# iptables -t nat -L
Chain PREROUTING (policy ACCEPT)
target prot opt source destination
Chain INPUT (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
Chain POSTROUTING (policy ACCEPT)
target prot opt source destination
[root@Jaking ~]# iptables-restore [root@Jaking ~]# iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere ACCEPT all -- localhost localhost ACCEPT icmp -- anywhere anywhere icmp echo-request ACCEPT icmp -- anywhere anywhere icmp fragmentation-needed ACCEPT tcp -- anywhere anywhere tcp dpt:http ACCEPT tcp -- anywhere anywhere tcp dpt:https ACCEPT udp -- anywhere anywhere multiport dports http,https ACCEPT tcp -- 192.168.1.63 anywhere tcp dpt:ssh ACCEPT tcp -- 192.168.1.3 anywhere tcp dpt:ssh ACCEPT udp -- 192.168.1.26 anywhere udp dpt:snmp DROP all -- anywhere anywhere Chain FORWARD (policy ACCEPT) target prot opt source destination DROP all -- anywhere anywhere Chain OUTPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere state ESTABLISHED DROP all -- anywhere anywhere [root@Jaking ~]# iptables -t nat -L Chain PREROUTING (policy ACCEPT) target prot opt source destination DNAT tcp -- anywhere 192.168.1.63 tcp dpt:http to:192.168.2.2:80 Chain INPUT (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination Chain POSTROUTING (policy ACCEPT) target prot opt source destination SNAT all -- 192.168.2.0/24 anywhere to:192.168.1.63
分享名称：生产环境中常用的iptables脚本
本文链接：http://www.shufengxianlan.com/qtweb/news27/486927.html
网站建设、网络推广公司-创新互联，是专注品牌与效果的网站制作，网络营销seo公司；服务项目有等
声明：本网站发布的内容（图片、视频和文字）以用户投稿、用户转载内容为主，如果涉及侵权请尽快告知，我们将会在第一时间删除。文章观点不代表本网站立场，如需处理请联系客服。电话：028-86922220；邮箱：631063699@qq.com。内容未经允许不得转载，或转载时需注明来源： 创新互联
- 选择IaaS提供商需要考虑的10个关键因素
- 解决Linux系统字符编码问题（linux修改字符编码）
- Linux用户组授权：有效访问控制（linux授权用户组）
- 基于Linux下PHP连接SQLServer的FreeTDS配置
- 两台服务器怎么做一主一备
- 如何用手机查看老公的通话记录清单？
- 几行代码，实现Python捕获、播放和保存摄像头视频！
- 数Linux下统计字符数的简便方法（linux统计字符）
- Linux虚拟机空间扩容教程！(怎样给虚拟机linux加空间)
- ds中文名啥车？ds4windows汉化版
- 抽屉滑道安装好怎么调整？详细步骤和注意事项
- 用SQLServer：禁用无法回避（sqlserver已禁）
- 创新互联Python教程：python中try-except-else语句的介绍
- 怎样把windows7系统下载到U盘里？windows7装进u盘里
- 安卓sdk更新报错